1303 HDR Production Monitor
DESCRIPTION
The 1303 HDR Production Monitor’s screen dimensions, sharpness, and pixel concentration make it an essential instrument for precise focus pulling. In the absence of time or correct measurements, a high-definition, instantaneous display can assist you in achieving your targets.
SPECIFICATIONS
- Input: 2x SDI, HDMI
- Output: 2x SDI, HDMI
- Display: 13-inch, 1920×1080, 1500nits with HDR Preview
- Height: 9 in
- Width: 13 in
- Length/Depth: 2.88 in
- Operating Temperature: 32F - 100F
- Storage Temperature: 33F – 115F
- Screen Protection: Acrylic or Anti-Reflective Acrylic screen protector available as an option
- Mount Points: 2x ¼”-20 on Top, Left & Right sides; RapidRail – Cold Shoe style rails on rear of monitor
- Display Panel Type: IPS
- Diagonal Size: 13
- Resolution: 1920×1080
- Pixel Density: 170 PPI
- Aspect Ratio: 16:9
- Active Area: 11.59” x 6.52”
- Max Brightness: 1500 nits
- Contrast: 1140:1
- Gamut: 100% Rec.709
- Color Depth: 10-bit (8+2)
- Viewing Angle: 178 Deg.
- Backlight Type: LED
- Adjustable Backlight: Yes
- Adaptive Color: No
- Input Signal: 3G-SDI Input Types
- YCC 4:2:2 @ 10 bits: 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88, 1080i1
- HD-SDI Input Types
- YCC 4:2:2 @ 10 bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
- SD-SDI Input Types: 480i29.97, 576i25
- HDMI Input Types
- Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50
- Component Input Types: Not Supported
- Composite Input Types: Not Supported
- Audio Input Types: HDMI & SDI Monitor through Speakers in Front Bezel or through Headphone Jack Metering up to 8 channels
- Output Signal: 3G-SDI Output Types
- YCC 4:2:2 1080p60, 1080p59.94, 1080p50, 1080i120, 1080i119.88,
- HD-SDI Output Types
- YCC 4:2:2 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98 all at 8 bits
- SD-SDI Output Types: Not Supported
- HDMI Output Types
- Supports YCC 4:2:2@ 8 bits, RGB & YCC 4:4:4 @ 8 bits: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50, 480i120, 480i119.88, 480i60, 480i59.94, 576i100, 576i50
- Component Output Types: Not Supported
- Composite Output Types: Not Supported
- Audio Output Types: Audio sent downstream unless a LUT is loaded on the output page which disables Audio out.
- Connector Type: SDI 2x 3G Inputs, 2x 3G Outputs
- HDMI: 1x Input, 1x Output
- Component: Not Supported
- Composite: Not Supported
- Audio: 1x Headphone Jack on Front of Monitor
- Power In: 1x XLR 4pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max
- Power Out: 1x XLR 4pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max
- USB: 1x Front USB2, 2x Rear USB2
- Controls: Primary
- Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: Image Capture; LUT Selection; Backlight Level; Input Selection; Scopes Toggle.
- Record Capture
- Dedicated Image Capture Button on Front Bezel
- Data I/O
- Storage Media: SD Card for LUTs, Captured Images, Image Overlays, Profile Saving & Loading, Firmware Upgrades
- USB: 1 Front & 2 Rear USB Ports for power (1.5A shared total), LUT Loading, Profile Saving & Loading
- Power:
- Connector: 1x XLR 4-pin 12 – 34VDC IN; 12V Lemo 2-pin OUT 4A Max
- Voltage: 12 – 34VDC
- Consumption: 25 – 39W
- Power Supply: AC – DC Power Converter “Brick” Included with Monitor 110 – 240VAC 50 – 60 HZ INPUT; 15V – 6A OUTPUT
- Battery Types: Gold Mount / VMount via 4pin XLR Connector
- Output Voltage: 12V, 2A max via LEMO Connector
- Software: Pixel Zoom
- 2x & 4x Zoom with smooth pan via joystick: Frame Guides
- Yes: Preset Aspect Ratios & Customizable
- DSLR Scale: Canon 5DMkii & Canon 7D
- Custom Scale: Underscan & Overscan
- Anamorphic De-Squeeze: 1.33x, 1.5x, 1.66x, 2.0x
- Image Rotate
- Yes – Automatic or Manual
- Image Flip: Automatic or Manual
- Cross Conversion: HDMI → SDI & SDI → HDMI
- Focus Assist: User Adjustable Color and Intensity
- Peaking: User Adjustable Intensity
- False Color: Rainbow & Arri Style
- Zebra: Dual User Configurable
- Waveform: Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting
- Vectorscope: with Optional Skintone line
- RGB Parade: Fully User Customizable
- Histogram: Luma & RGB Style
- Image Capture: With Dedicated Button
- Custom LUTS: Loadable by Page or as System Wide Color Calibration
- LUT Downstream: Available on SDI 1 or HDMI Out
- LUT Import: Via SD Card or USB storage device
- Overlay with Intensity Slider and Blink Setting
- Firmware: User Upgradable. Compatible with 1303-1703-2403-3203 Firmware Version 1.1 and later
- Audio Meters: HDMI & SDI up to 8 channel